Kugelmann Maschinenbau DUPLEX INOX, Руководство по эксплуатации

Страница: 36 / 50

Hand wheel for mechanical adjustment of the spreading pattern
Hand wheel to secure the setting
Adjusting spindle (horizontal setting of
spreading disc)
At the factory, the spreading disc is set horizontally via the two spindles.
Set the spreading quantity via the control system and check it according to the operating instructions for the k-tronic.
When changing the spreading material, we recommend to check the settings in any case.
First setting of spreader
Refined salt and rock salt with standard density are stored in the control system and must be dry. All safety
rules are observed. Spreading salt has been filled into the chambers, the spreader is ready for operation.
The hydraulic drive or the respective other drive as well as the rotating beacon have been switched on.
Subject to modifications
36
_Operation of spreader