Kugelmann Maschinenbau DUPLEX INOX, Руководство по эксплуатации

Страница: 44 / 50

Maintenance and care
The Kugelmann three-point spreader is maintenance-free to a large extent. Laterally under the protective
cover, the bearings of the conveyor screws are equipped with one lubricating nipple each. The chain tension
(drive of conveyor screws) should be checked monthly and corrected, if necessary. At each hydraulic drive
motor, slacken 4 screws, position the hydraulic motor anew and fasten the screws again.
These 4 screws must be slackened and fastened again after
the drive chain has been tightened.
Spreader with electrical adjustment of the spreading pattern
At spreaders with electrical adjustment of the spreading pattern, make sure that the piston rod is clean. The
piston rod moves the spreading disc forth and back and has to be cleaned regularly.
Spreader with drive via PTO pump
Secure the PTO pump against rotation after every operation. The transmission oil level can be seen at the
sight glass on the side. Transmission oil SAE 80 or 90, approx. 0.5 l, fill up until sight glass level. Replace
transmission oil and hydraulic oil with filter regularly.
Subject to modifications
44
Maintenance and care, wear parts