Kübler SMC1.3, Руководство по безопасности

Страница: 132 / 235

R60047.0002 - Index 2 EN – page 12 / 115
5 Description of Connections
This chapter describes only the electrical connections and their general function.
Name Description see chapter
X1 | RELAY OUT
5.8 Relais
X2 | RELAY OUT 5.8 Relais outputs
X3 | 24V IN 5.1 Power Supply
X4 | CONTROL OUT 5.7 Control output
X5 | ANALOG OUT 5.6 Analog output 4 to 20 mA
X5 | ENCODER OUT 5.5 Encoder output
X11 5.10 SMCB Operator Interface
X12 5.11 USB Interface for the OS6.0 Operator Surface
X21 | ENCODER IN 1 5.3 Encoder inputs
X22 | ENCODER IN 2 5.3 Encoder inputs
X23 | CONTROL IN 1 5.4 Control inputs
X24 | CONTROL IN 2 5.4 Control inputs
S1 5.9 DIL switch
ERROR – ON 5.12 LEDs / Status Indication
The connection to the outputs is only safe when the follower unit is
able to detect the fault status of each output and when the outputs
are configured accordingly.
In order to prevent simultaneous damages and disturbance of the
cables by external influences, the encoder resp. sensor lines must be
kept physically apart
from each other.