KTR-Group KTR-STOP S F B Series, Инструкция по эксплуатации и сборке

Страница: 2 / 26

KTR-STOP
®
S-xx-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 44590 EN
2 of 26
3
Please observe protection
note ISO 16016.
Drawn: 2018-09-10 Shg/Wie Replacing: KTR-N dated 2018-02-07
Verified: 2018-09-10 Shg Replaced by:
The KTR brake system was designed to operate as a service brake/emergency stop brake on rotating
brake disks. For any other applications please consult with KTR.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 6
2.4 Intended use 6
3 Storage, transport and packaging 6
3.1 Storage 6
3.2 Transport and packaging 6
4 Assembly 7
4.1 Components of the brake 7
4.2 Preparation of assembly 10
4.3 Brake pads 11
4.4 Assembly of the brake 11
4.5 Setting/resetting of the centering system 13
4.6 Pressure port of a brake 14
4.7 Pressure port of several brakes 15
4.8 Start-up of the brake 16
4.9 Setting/Resetting of the brake 17
4.10 Recommendation of fluids to be used 18
4.11 Disassembly of the brake 19
4.12 Spares inventory, customer service addresses 19
4.13 Disposal 20
5 Maintenance 20
5.1 Replacement of brake pads 20
5.2 Maintenance of the brake / replacement of single parts 21
5.3 Maintenance and service 24
6 Accessories - Sensor 25
6.1
Technical Data „State/wear sensor“
25
6.2 Assembly / start-up 26
Table of contents