KTR-STOP
®
S-xx-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
44590 EN
10 of 26
3
Please observe protection
note ISO 16016.
Drawn:
2018-09-10 Shg/Wie
Replacing:
KTR-N dated 2018-02-07
Verified:
2018-09-10 Shg
Replaced by:
Subassembly 6: Pad retraction set movable side
Compo-
nent
Quantity
Description
Illustration 9: Pad retraction set of brake caliper
6.1
1
Cap screw
DIN EN ISO 4762 - 10.9
6.2
1
Pressure spring
Subassembly 8: Pad retraction set fixed side
Compo-
nent
Quantity
Description
Illustration 10: Pad retraction set
7.1
1
Cap screw
DIN EN ISO 4762 - 10.9
7.2
1
Pressure spring
7.3
1
Sealing plug
To ensure the full braking power, the preparation for assembly needs to be carefully per-
formed.
The connection plate for the brake as well as the brake disk have to be inspected for dimensional accuracy.
For that purpose investigate the connection dimensions, connection surfaces and tolerances as specified in
the drawing (see illustrations 1 to 3 and table 3).
Clean and degrease the brake disk and mounting surfaces. Dirt can easily be removed by means of solvents.
The connection between connection surface and brake is defined as frictional contact. Any
residues of oil, dirt and corrosion protection reduce the coefficient of friction. As a result
the operation of the brake and the full braking power are no longer ensured.
!
P
lease observe the manufacturer’s instructions regarding the use of solvents.
4
Assembly
4.1 Components of the brake
4.2 Preparation of assembly
