SETUP 2
3
2.1
Unpacking and setting up the vehicle
Condition
Packaging V2
–
Unpack and set up the V2 vehicle. (
–
Remove V2 headlight mask. (
Condition
Packaging V12
–
Unpack and set up the V12 vehicle. (
–
Install V12 fork legs. (
–
Install V12 shock absorber. (
–
Install C12 combination instrument. (
–
Stick on the reflector. (
–
Install handlebars. (
–
Install the handlebar cushion. (
–
Install left side controls. (
–
Install right side controls. (
–
Install left and right rear mirrors. (
–
Install left and right hand guards. (
–
Install front fender. (
–
Install the front wheel. (
–
Install the front and rear turn signals. (
–
Install the license plate lamp. (
–
Install the reflector. (
–
Route the front turn signal cable. (
–
Route the rear turn signal cable. (
–
Install the license plate holder extension. (
–
Remove the motorcycle from the lift stand. (
–
Install the engine guard. (
–
Install the footrests. (
–
Recharge the battery. (
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Adjust the combination instrument. (
–
Adjust kilometers or miles. (
–
Adjust the clock. (
–
Refuel. (
–
Unpack and mount the
KTM PowerParts
included in the delivery (optional).
Info
Read the accompanying
KTM PowerParts
fitting instructions.
–
Remove remaining protective film.
–
Attach the sticker included in the delivery (optional).
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net
for handover to the customer.
Info
Transport mode must be deactivated to be able to start the motorcycle.