3 SERVICE WORK ON THE CHASSIS
4
3.1
Unpacking and setting up the V2 vehicle
E00851-10
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you have
finished.
–
Remove and unpack the separate enclosure and attachments.
Check that the scope of supply is complete using the enclosed
packing list.
–
Have a lift stand available.
Lift stand (78929955100)
–
Carefully loosen and remove the tension belt of the footrest
mount.
Info
An assistant prevents the motorcycle from falling over.
402050-01
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
3.2
Removing V2 headlight mask
F01233-10
–
Remove the spare key and
KEYCODECARD
and keep in a safe
place for the handover.
–
Loosen rubber band
1
and tilt headlight mask forwards.
E00971-10
–
Disconnect the plug-in connector
2
of the headlight and the
plug-in connector
3
of the ignition lock.
–
Lay down the headlight mask carefully to the side and protect
from damage.
