SERVICE WORK ON THE CHASSIS 3
9
E01055-10
–
Route the cables without tension and secure with cable ties
and cable holders.
F01220-01
Condition
Customer request: non-approved installation for road use.
Warning
Voiding of the government approval for road use and
the insurance coverage
If the combination switch
is installed, the vehicle's approval for road use is
invalidated.
–
Only operate the vehicle in closed-off areas
remote from public road traffic if the combina-
tion switch is installed.
–
Mount left side combination switch.
Combination switch, left side (79039974044)
Info
The left side combination switch is optionally avail-
able as an accessory.
With the combination switch mounted the second
mapping and traction control can be used.
The figure shows a possible installation position of
the left side combination switch.
Observe the accompanying
KTM PowerParts
fitting
instructions.
The launch control is not available for this model.
F01222-10
–
Remove the protection cap and join plug-in connector
1
of the left combination switch.
–
Route the cable without tension and secure with cable
tie(s).
