3 SERVICE WORK ON THE CHASSIS
16
F01179-10
–
Drill a hole at marking
A
to the size of the marking.
F01180-10
–
Route the turn signal cable harness through the frame from
the front to the rear paying attention to the plugs as you do so.
F01181-10
–
Join the turn signal cable harness plug-in connector to the
main wiring harness plug-in connector.
–
Mount EFI control unit
1
on the holder.
Info
The wiring harness runs under the EFI control unit.
–
Lock the seat. (
F01182-10
–
Route the turn signal cable on the left side on the license
plate holder and feed the turn signal cable through the hole.
–
Route the cable of the tail light on the right side on the license
plate holder.
