SERVICE WORK ON THE CHASSIS 3
15
E00969-10
–
Join plug-in connector
2
of the turn signal cable.
–
Make sure that the bulb is located in socket
3
.
» If there is no bulb in the socket:
–
Insert the bulb, included in the accessory pack, in
socket
3
.
Indicator lamps (W2.3 W / socket W2.1x4.6 d)
–
Position the cable with socket and bulb in turn signal control
lamp
1
.
3.20
Routing the rear turn signal cable
Preparatory work
–
Fold the seat up. (
F01176-10
Main work
–
Pull EFI control unit
1
off the holder and hang to the side.
F01177-10
–
Remove screws
2
.
–
Remove screws
3
.
–
Lower the license plate holder and hang the tail light to the
side.
Info
Pay attention to the cable of the tail light.
