KTM 990 Adventure AUS Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 218

KTM 990 Adventure AUS Скачать руководство пользователя страница 106

BRAKES

104

11.7

Checking the front brake linings

Warning

Danger of accidents

Reduced braking efficiency caused by worn brake linings.

–

Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)

Note

Danger of accidents

Reduced braking efficiency caused by damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are rendered unserviceable. Check the brake linings regularly.

100559-10

–

Check all brake linings on both brake calipers to ensure they have minimum thick-
ness



.

Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

x

–

Check all brake linings on both brake calipers for damage and cracking.
» If there is wear or tearing:

–

Change the front brake linings.

x

11.8

Checking the free travel of the foot brake lever

Warning

Danger of accidents

Brake system failure.

–

If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust free travel on foot brake lever according to specifications.

«
...
104
105
106
107
108
...
»

Содержание 990 Adventure AUS



























































































































































































































Отзывы:

Нет отзывов