KTM 990 Adventure AUS Скачать руководство пользователя страница 103

Страница: 103 / 218

BRAKES

101

Rear

4.5 mm (0.177 in)

» If the brake disc thickness is less than the specified value:

–

Change the brake disc.

–

Check the front and rear brake discs for damage, cracks and deformation.
» If damage, cracks or deformation are visible on the brake disc:

–

Change the brake disc.

11.5

Checking the front brake fluid level

Warning

Danger of accidents

Failure of the brake system.

–

If the brake fluid level falls below the

MIN

mark, this indicates a leakage in the brake system or worn-out brake linings. Check

the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)

Warning

Danger of accidents

Reduced braking effect caused by old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Содержание 990 Adventure AUS



























































































































































































































Результаты поиска

Содержание 990 Adventure AUS

Отзывы:

KTM 990 Adventure AUS, Руководство пользователя, Страница: 103 / 218

Результаты поиска

Содержание 990 Adventure AUS

Отзывы: