KTM 690 SMC 2008, Руководство по ремонту

Страница: 165 / 227

41/THROTTLE VALVE BODY
163
Loctite ® 648™
Info
Tighten by hand only, do not use a tool.
–
Press "Continue" .
–
Open and close the throttle grip fully ten times.
The "Continue" button appears.
–
Press "Continue" .
–
Check the voltage value.
Info
The "Continue" button only appears if the measured value equals the set-
point value.
Throttle position sensor circuit A
Emergency running position - volt-
age
"THAD"
0.70… 0.74 V
» If the displayed value is not equal to the setpoint value:
–
Repeat the setting.
601135-10
–
Fix fuse cover

with locking varnish.
600946-11
–
Use "Continue" to start the "Adjusting the position of the throttle grip sensor" menu.
–
Check the voltage value.
Info
The "Continue" button only appears if the measured value equals the set-
point value.
Throttle grip sensor
Voltage "APAD" 0.70… 0.74 V
» If the displayed value is not equal to the setpoint value:
–
Loosen screws

.
–
Adjust the accelerator position sensor

by turning to the specified value.
–
Tighten screws

.
–
Press "Continue" .
–
Open and close the throttle grip fully ten times.
The "Continue" button appears.
–
Press "Continue" .
–
Check the voltage value.
Info
The "Continue" button only appears if the measured value equals the set-
point value.
Throttle grip sensor
Voltage "APAD" 0.70… 0.74 V
» If the displayed value is not equal to the setpoint value:
–
Repeat the setting.