KTM 65 SX 1999, Руководство пользователя

Страница: 36 / 91

11 SERVICE WORK ON THE CHASSIS
34
–
Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
resting locations should be noticeable.
» If click positions are noticeable:
–
Adjust the steering head bearing play. ( p. 34)
–
Check the steering head bearing and replace if required.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 28)
11.12 Adjusting the steering head bearing play
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 28)
H00157-10
Main work
–
Remove fuel tank breather  .
–
Loosen screws  .
–
Loosen screw

.
–
Loosen and retighten nut

.
Guideline
Nut, steering stem M20x1.5 10 Nm (7.4 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screw  .
Guideline
Screw, steering stem M8 20 Nm
(14.8 lbf ft)
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Position fuel tank breather

.
Finishing work
–
Check play of steering head bearing. ( p. 33)
–
Remove the motorcycle from the lift stand. ( p. 28)
11.13 Greasing the steering head bearing
300669-01
–
Remove the lower triple clamp. ( p. 31)
–
Install the lower triple clamp. ( p. 32)
11.14 Removing the start number plate
H00137-10
–
Remove screw

.
–
Unhook the start number plate from the brake line and remove it.