KTM 65 SX 1999 Скачать руководство пользователя страница 25

Страница: 25 / 91

TUNING THE CHASSIS

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

10.4

Adjusting the high-speed compression damping of the shock absorber

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop
will be glad to help.)

Info

The high-speed setting can be seen during the fast compression of the shock absorber.

H00151-10

–

Turn adjusting screw



all the way clockwise with a socket wrench.

Info

Do not loosen fitting



–

Turn counterclockwise by the number of turns corresponding to the shock absorber
type.
Guideline

Compression damping, high-speed

Comfort

1.5 turns

Standard

1 turn

Sport

0.5 turns

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

10.5

Adjusting the rebound damping of the shock absorber

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop
will be glad to help.)

K00213-10

–

Turn adjusting screw



clockwise up to the last perceptible click.

–

Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline

Rebound damping

Comfort

8 clicks

Standard

5 clicks

Sport

2 clicks

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.

Содержание 65 SX 1999




























































































Результаты поиска

Содержание 65 SX 1999

Отзывы:

KTM 65 SX 1999, Руководство пользователя, Страница: 25 / 91

Результаты поиска

Содержание 65 SX 1999

Отзывы: