KTM 450 XC-W SIX DAYS USA 2010 Скачать руководство пользователя страница 30

Страница: 30 / 118

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION

6.7

Preparing for rides at high temperature and slow speed

600872-10

–

Check the radiator cap.

Value on radiator cap

1.8 bar (26 psi)

» If the displayed value does not correspond to specifications:

Warning

Danger of scalding

During motorcycle operation, the coolant gets

very hot and is under pressure.

–

Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.

–

Change the radiator cap.

–

Seal the air filter box.

Tip

Seal the air filter box on the edges against dirt.

–

Clean the air filter.

(

p. 75)

Info

Check the air filter approx. every 30 minutes.

600868-01

–

Adjust the secondary drive to the road conditions.

Info

The engine oil quickly gets hot if the clutch has to be operated very often
due to an excessively high secondary drive.

–

Clean the chain.

Chain cleaner (

p. 110)

–

Clean radiator fins.

–

Straighten bent radiator fins carefully.

–

Check the coolant level. (

p. 72)

6.8

Preparing for rides at low temperatures or in snow

–

Seal the air filter box.

Tip

Seal the air filter box on the edges against dirt.

–

Clean the air filter.

(

p. 75)

Info

Check the air filter approx. every 30 minutes.

600870-01

–

Fit a waterproofing device on the air filter.

Waterproofing device for air filter (59006021000)

Info

See the

KTM PowerParts

fitting instructions.

–

Adjust the carburetor jetting and settings.

Info

Your authorized KTM workshop has the recommended carburetor tuning set-
tings.

Содержание 450 XC-W SIX DAYS USA 2010























































































































Результаты поиска

Содержание 450 XC-W SIX DAYS USA 2010

Отзывы:

Бренды по названию

Популярные бренды

KTM 450 XC-W SIX DAYS USA 2010, Руководство пользователя

Результаты поиска

Содержание 450 XC-W SIX DAYS USA 2010

Отзывы:

Бренды по названию

Популярные бренды