KTM 450 XC-W SIX DAYS USA 2010, Руководство пользователя, Страница: 86 / 118

MAINTENANCE WORK ON CHASSIS AND ENGINE
84
500159-10
–
Place a suitable container under the engine.
–
Remove the gear oil drain plug

.
–
Remove the gear oil screen plug

.
–
Completely drain the gear oil.
–
Thoroughly clean the gear oil drain plug with a magnet.
–
Thoroughly clean the drain plug and gear oil screen with a magnet.
–
Clean the sealing surface on the engine.
–
Refit gear oil drain plug

with seal ring and tighten it.
Guideline
Gear oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
–
Mount and tighten the gear oil screen drain plug

.
Guideline
Plug, gear oil screen M16x1.5 20 Nm
(14.8 lbf ft)
9.114
Filling up with gear oil
x
Info
Too little gear oil or poor-quality oil results in premature wear to the transmission.
200118-10
–
Remove the screw cap

and fill up with gear oil.
Gear oil 0.90 l (0.95 qt.) Engine oil (SAE 10W/50) ( p. 108)
–
Mount and tighten screw cap

.
Danger
Danger of poisoning
Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Check the gear oil level. ( p. 83)
9.115
Adding gear oil
x
Info
Too little gear oil or poor-quality oil results in premature wear to the transmission.
200116-10
–
Remove gear oil level check screw

.