KTM 450 XC-W SIX DAYS USA 2010, Руководство пользователя, Страница: 71 / 118

MAINTENANCE WORK ON CHASSIS AND ENGINE
69
400273-10
–
Insert the fuse.
Fuse (58011109110)
Info
A reserve fuse

is located in the starter relay.
Replace a blown fuse

only by an equivalent fuse.
–
Replace the protection cover.
–
Install the air filter box lid. ( p. 74)
9.77
Checking the headlight adjustment (all EXC models, all 450/530 XC-W models)
0 0 A A
0 0 B B
400726-10
–
On a light-colored wall behind a horizontal area, make a mark as high as the center
of the headlight.
–
Make a second mark at distance of

under the first mark.
Guideline
Distance

5 cm (2 in)
–
Stand the motorcycle upright in front of the wall at distance

. The driver, in full
protective clothing, should now sit on the motorcycle in a normal sitting position
(feet on the footrests).
Guideline
Distance

5 m (16 ft)
–
Switch on low beam. Check the headlight adjustment.
The border between light and dark must be exactly at the lower mark when the
motorcycle is operational and complete with rider.
» If the boundary between light and dark does not meet specifications:
–
Adjust the beam width of the headlight. ( p. 69)
9.78
Adjusting the beam width of the headlight (all EXC models, all 450/530 XC-W models)
–
Check the headlight adjustment. ( p. 69)
301251-10
–
Loosen screw

.
–
Adjust the light range by swiveling the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with a rider (mark is applied under: Checking the headlight adjust-
ment).
Info
If you have a payload, you may have to correct the headlight beam width.
–
Tighten screw

.
9.79
Removing the seat
500080-10
–
Remove screw

. Lift up the seat at the rear, pull it back and then remove from
above.