KTM 450 XC-W SIX DAYS USA 2010, Руководство пользователя

Страница: 85 / 118

MAINTENANCE WORK ON CHASSIS AND ENGINE
83
9.111
Checking the gear oil level
Info
The gear oil level should only be checked when the engine is cold.
–
Stand the motorcycle upright on a horizontal surface.
200116-10
Condition
Engine is cold.
–
Remove gear oil level check screw

. Stand the motorcycle upright.
–
Check the gear oil level.
A small amount of gear oil should flow out.
» If no gear oil flows out:
–
Add gear oil. x ( p. 84)
–
Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check M6 8 Nm (5.9 lbf ft)
9.112
Changing gear oil, cleaning gear oil screen
x
301490-10
–
Drain the gear oil and clean the gear oil screen. x ( p. 83)
–
Fill up with gear oil.
x
( p. 84)
9.113
Draining gear oil, cleaning gear oil screen
x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the gear oil only when the engine is warm.
–
Stand the motorcycle on its side stand on a horizontal surface.