KSB Calio-Therm S NC, Инструкция по установке и эксплуатации

Страница: 19 / 32

5 Installation at Site
19 of 32
Calio-Therm S NC/NCV
NOTE
When fitting the power cable to the plug-type connection make sure to insert the
strain relief device into the cable gland in the correct position. Only in its correct
installation position can the strain relief device function correctly in combination
with the cable gland.
Otherwise the strain relief device will be pressed onto the blue locking/unlocking
mechanism of the plug, which causes it to open and release the cores.
5.
Insert the stripped cores/strands of the cable into the corresponding terminals L,
N and Earth (PE) of the plug. The markings are shown on the blue removal
mechanism (ring). The automatic locking mechanism locks the strand in place,
establishes contact and prevents the strand from sliding out of the plug.
A marking underneath the PE terminal helps identify the correct connection.
After the cable has been wired to the plug, screw the cable entry onto the plug
and tighten it.
1
Fig. 5:
Plug-type connection with marking
1 PE marking
1 2
3
Fig. 6:
Connections at the plug
1 Phase (230 VAC) 2 Neutral (N)
3 Earth (embossed marking on the
ring) (PE)
6.
After the cable/plug assembly has been completed, connect the plug to the jack
at the pump.
7.
The cores/strands can be removed from the plug by pressing down the blue ring.