KSB Calio-Therm S NC Скачать руководство пользователя страница 25

Страница: 25 / 32

7 Servicing/Maintenance

25 of 32

Calio-Therm S NC/NCV

DANGER

Strong magnetic field in the rotor area

Danger of death for persons with pacemaker!

▷

Keep a safety distance of at least 0.3 m.

DANGER

Pump acting as a generator when running in reverse

Danger to life from hazardous induction voltage at the motor terminals!

▷

Prevent the fluid from flowing back by closing the shut-off elements.

WARNING

Danger by strong magnetic field

Danger of crushing injuries when pulling out the rotor!
Due to the strong magnetic field the rotor can be suddenly pulled back into its
original position!
Danger of magnetic parts near the rotor being attracted!

▷

The rotor must generally only be removed from the motor housing by
authorised specialist personnel.

▷

Remove any magnetic parts from the vicinity of the rotor.

▷

Keep the assembly area clean.

▷

Keep a safety distance of at least 0.3 m from electronic components.

CAUTION

Strong magnetic field in the rotor area

Interference with magnetic data carriers, electronic devices, components and
instruments!

Uncontrolled magnetic attraction forces between magnetic components, tools or
similar!

▷

Remove any magnetic parts from the vicinity of the rotor.

▷

Keep the assembly area clean.

CAUTION

Danger by strong magnetic field

Negative impact on or damage to electrical devices!

▷

The rotor must generally only be removed from the motor housing by
authorised specialist personnel.

The relevant notes and steps stated been observed/carried out.

The pump has cooled down to ambient temperature.

A container for collecting the fluid has been positioned underneath the pump
set.

De-energise the pump set (disconnect the motor) and ensure that it cannot be
re-energised unintentionally.

Close the shut-off elements.

Disconnect the discharge and suction nozzles from the piping.

Remove the complete pump set from the piping.

Содержание Calio-Therm S NC

































Результаты поиска

Содержание Calio-Therm S NC

Отзывы:

Похожие инструкции для Calio-Therm S NC

Бренды по названию

Популярные бренды

KSB Calio-Therm S NC, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Calio-Therm S NC

Отзывы:

Похожие инструкции для Calio-Therm S NC

Бренды по названию

Популярные бренды