manualshive.com logo in svg

Krone Vendro 680, Руководство по эксплуатации, Страница: 65 / 104

Поделиться
Скачать
Krone Vendro 680 Скачать руководство пользователя страница 65

Driving and transport

9

Preparing the machine for road travel

9.1

Vendro 680

Original operating instructions 150001223_01_en

65

9

Driving and transport

 WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, 

see

Page 12

.

 WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„

The safety routines must be read and observed to avoid accidents, 

see Page 24

.

 WARNING

Risk of accident caused by non-locked regulating valves of tractor

When regulating valves are not locked, machine components could be activated
unintentionally. This may result in serious accidents.

„

To avoid that functions are triggered by mistake, the regulating valves of the tractor must
be in neutral position when performing transport journeys on the road and must be locked.

INFO

When moving on public highways, the machine must be equipped with the "Warning panels
and road travel lighting" accessories kit 

see Page 18

.

9.1

Preparing the machine for road travel

ü

All items listed in chapter "Start-up" have been fulfilled, 

see Page 44

.

ü

The border spreading system is in the basic position (centre driving), 

see Page 62

.

ü

The machine is shut down and secured, 

see Page 24

.

ü

The hydraulic hoses are connected, 

see Page 49

.

ü

The universal shaft is mounted, 

see Page 50

.

ü

The front and the rear support jacks are in transport position, 

see Page 56

.

ü

For version "guide wheel front":

 The guide wheel is in transport position, 

see Page 73

.

ü

For version with "Road travel lighting":

 The road travel lighting has been connected,

tested and is in perfect working order.

ü

The machine is in the transport position, 

see Page 59

.

ü

 The control units on the tractor are in neutral position and locked.

ü

The stop cocks on the hydraulic hose lines are closed, 

see Page 55

.

ü

The transport width is reduced, 

see Page 66

.

ü

Soiling and crop residue have been removed from the machine, in particular from the
lighting and identification elements.

Содержание Vendro 680









































































































Отзывы:

Нет отзывов