manualshive.com logo in svg

Krone Vendro 680, Руководство по эксплуатации, Страница: 69 / 104

Поделиться
Скачать
Krone Vendro 680 Скачать руководство пользователя страница 69

Settings

10

Setting the spreading angle of the rotors

10.1

Vendro 680

Original operating instructions 150001223_01_en

69

10

Settings

 WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, 

see

Page 12

.

 WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„

The safety routines must be read and observed to avoid accidents, 

see Page 24

.

10.1

Setting the spreading angle of the rotors

INFO

The setting must be made on the running wheels of the machine.

INFO

The working height must be checked and, if necessary, adjusted if the spreading angle is
changed.

ü

The machine is in the working position.

„

Lift the machine only until the spreading angle can be adjusted.

„

Close the stop cocks on the hydraulic hoses.

„

Securely support the machine.

„

Shut down and safeguard the machine, 

see Page 24

.

I

II

KWG000-033

The spreading angle of the rotor tines must be adjusted to the situation of the ground and the
forage. The spreading angle can be set in 4 steps from flat to steep. The following reference
points are specified for selecting the spreading angle according to the harvesting conditions:

Содержание Vendro 680









































































































Отзывы:

Нет отзывов