Krone Vendro 680 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 104

Krone Vendro 680 Скачать руководство пользователя страница 47

Start-up

7

Preparing the tractor

7.2

Vendro 680

Original operating instructions 150001223_01_en

47

Actual value ac-
cording to calcula-
tion

Permitted value ac-
cording to operat-
ing instructions for
the tractor

Double permitted
tyre load capacity
(two tyres)

Minimum ballasting

Front/rear

kg

Total weight

kg

<

kg

Front axle load

kg

<

kg

<

kg

Rear axle load

kg

<

kg

<

kg

7.2

Preparing the tractor

NOTICE

Damage to the machine caused by a collision with the tow coupling

Depending on the type of tractor, the top link of the tractor and/or the universal shaft of the
machine may collide with the tow coupling and damage the tractor and/or the machine.

If necessary, remove the tow coupling. For additional information, please refer to the
tractor manufacturer's operating instructions.

KS000-021

The machine is equipped with Cat. II centring pivots for the three-point linkage.

The tractor lower links must always be installed so that the lifting points of the lower links are
all at the same distance from the ground.

Fix the lower links using retaining chains or retaining rods to prevent the machine swinging
to the side during transport or turning.

7.3

Connecting machine to tractor

NOTICE

When attaching implements at the front and rear, the permitted total weight, the permitted
axle loads and the tyre load capacity of the tractor must not be exceeded. Even with an
implement mounted at the rear, the front axle of the tractor must always be loaded with at
least 20% of the tare weight of the tractor.

Prior to starting the trip, ensure that these conditions are met,

«
...
45
46
47
48
49
...
»

Содержание Vendro 680









































































































Отзывы:

Нет отзывов