Krone Vendro 680 Скачать руководство пользователя страница 28

Страница: 28 / 104

Safety

2.6

Safety Labels on the Machine

Vendro 680

Original operating instructions 150001223_01_en

Ord. no. 942 196 1 (2x)

Danger due to crushing or shearing

Risk of injury due to crushing or shearing points on moving
machine parts.

While parts are moving, never reach into areas where there
is a risk of being crushed.

Ord. no. 939 100 4 (1x)

Danger when exceeding the maximum permissible PTO
speed or the maximum permissible operating pressure

When exceeding the permissible PTO speed, machine parts
may be destroyed or ejected.

If the maximum permissible operating pressure is exceeded,
hydraulic parts may be damaged.

As a result, people may be seriously or fatally injured.

Observe the permissible PTO speed.

Observe the permitted operating pressure.

Order no. 27 021 177 0 (3x)

Danger due to high-pressure liquid

The pressure accumulator is under gas and oil pressure.
There is a risk of injury if the pressure accumulator is not re-
moved or repaired properly.

Observe the notices in the operating instructions before
removing and repairing the pressure accumulator.

The pressure accumulator may only be removed and
repaired by a specialist workshop.

Order no. 939 469 1 (2x)

Danger due to impact or crushing

Danger of death due to machine parts folding down or lower-
ing.

Ensure that there is nobody in the swivel range of the
machine parts.

Maintain an adequate distance from moving machine parts.

Ord. no. 27 023 928 0 (3x)

939 472-2

Danger from objects being ejected

When the machine is running, there is a risk of injury as ob-
jects may be flung out uncontrollably.

When the machine is running, keep your distance.

Содержание Vendro 680









































































































Результаты поиска

Содержание Vendro 680

Отзывы:

Krone Vendro 680, Руководство по эксплуатации, Страница: 28 / 104

Результаты поиска

Содержание Vendro 680

Отзывы: