Krone Titan 6/50 GL Скачать руководство пользователя страница 58

Страница: 58 / 134

IV - 16

Comfort Control Unit

Activating/deactivating silage.

Calling the menu

Main menu 1 "Settings" is displayed

•

You can select menu 1-2

with the rotary

potentiometer. The icon is shown in reverse
colours.

•

Press the rotary potentiometer.

The display shows menu 1- 2 "Silage".

The current status is displayed as an icon:

•

= Silage off

•

= Silage on (continuous operation)

•

= Automatic silage (silage on, if the pickup

is in the floating position)

The

icon in the upper line indicates that the

displayed status is saved.

Changing and saving status

•

Set the desired status with the rotary potentiometer.

The

icon in the top line goes out.

•

Press the rotary potentiometer. The set status is

saved and the

icon appears in the upper line.

•

You can use the

key to close the menu

currently displayed.

The display shows menu level 1 "Settings".

•

Pressing the

key and holding it down brings up

the basic screen.

L400060

L400070

4.7.4 Menu 1-2 "Silage" (optional)

The connection for the silage material
device is located close to the job
computer (about 0.5 m in cable harness
1X1).

Содержание Titan 6/50 GL







































































































































Результаты поиска

Содержание Titan 6/50 GL

Отзывы:

Krone Titan 6/50 GL, Руководство по эксплуатации, Страница: 58 / 134

Результаты поиска

Содержание Titan 6/50 GL

Отзывы: