Krone Titan 6/50 GL, Руководство по эксплуатации, Страница: 38 / 134

III - 14
Operation
b)
3.10.2.3 For the electromagnetic operator-friendly
control unit without automatic loader
• When starting the loading process, switch on the
hydraulic oil circulation on the tractor and arrest the
switch lever.
• Switch the pick-up switch to "Lower".
The pick-up can be run in this position during the whole of
the loading process so that the pick-up is able to
accomodate itself to the ground.
•
Switch on the power take-off shaft and start the loading
process.
When starting the loading procedure, switch on the
scraper-floor advance when the loading material has
reached approx. 3/4 of the total height in order to
prevent the pile from tipping over.
• As loading continues, switch on the scraper floor when
the loading height has been reached or if the loading
unit runs unevenly because the loading material is
heavy.
c)
3.10.2.4 For the electromagnetic operator-friendly
control unit with automatic loader
• When starting the loading process, switch on the
hydraulic oil circulation on the tractor and arrest the
switch lever.
• Switch the Pick-up switch to "Lower".
The pick-up can be run in this floating position during the
entire loading process.
•
Switch on the automatic loader (the time delay should
be adjusted to the material being loaded). (Sect. 4.7.3)
Dry = high time delay
Moist = low time delay
• Switch on the power take-off shaft and start the loading
process.
When starting the loading process, switch on the
scraper-floor advance when the loading material has
reached approx. 3/4 of the total height in order to
prevent the pile from tipping over.
When the loading height has been reached, the scraper
floor switches on automatically until the message „Wagon
full“ appears on the display and the hooter gives a short
tone.