manualshive.com logo in svg

Krone Comprima V 180, Оригинальная инструкция по эксплуатации, Страница: 50 / 242

Поделиться
Скачать
Krone Comprima V 180 Скачать руководство пользователя страница 50

6

Initial operation

6.7

Mounting the bale ejector

50

Comprima V 180

Original Operating Instructions 150001053_00_en

INFORMATION

For more details or in case of different universal shafts, refer to the operating instructions for
the universal shaft comprised in the delivery.

6.7

Mounting the bale ejector

For "single axis" version

For "Tandem axle" version

1

2

2

1

RP000-494

ü

The tailgate is opened and secured, 

refer to page 73

.

ü

The machine is shut down and safeguarded, 

refer to page 25

.

„

Undo the screw connections (1) on the mounting plates (2) on the right and left side, but do
not remove.

„

Fold the mounting plates (2) outwards.

6

2

5

3

4

1

RP000-495

„

Slide the bale ejector (2) between the mounting plates (6), inserting the bolts (5) into the
lower bores on the mounting plates (6) on the right and left side of the bale ejector (2).

„

Secure the bolts (5) on the right and left of the bale ejector (2) with a disc (4) and clamping
sleeve (3).

„

Tighten the screw connections (1) of the mounting plates on the right and left side of the
bale ejector (2).

Содержание Comprima V 180



















































































































































































































































Отзывы:

Нет отзывов