Krone Comprima V 180 Скачать руководство пользователя страница 30

Страница: 30 / 242

Safety

2.6

Safety labels on the machine

Comprima V 180

Original Operating Instructions 150001053_00_en

Ord. no. 939 125 1 (2x)

Danger from sharp blades.

You may get your hands cut when reaching
into the danger zone of the blades.

Wear cut-resistant protective gloves.

Ord. no. 27 014 576 0 (2x)

Danger due to impact or crushing

There is danger to life due to the tailgate
lowering.

Before carrying out any maintenance work
in the area of the tailgate, close the stop
cock on the left lifting cylinder.

Ensure that there is no one under the raised
tailgate.

Ord. no. 939 520 1 (2x)

Danger due to rotating auger

There is a danger of becoming caught or
wrapped by the rotating auger.

Never reach into the rotating auger.

Keep distance to moving machine parts.

Ord. no. 942 002 4 (4x)

Danger due to rotating machine parts

When the machine is running, there is a risk of
injury due to rotating machine parts.

Before starting up, move the guards into
their protective position.

Ord. no. 942 360 4 (1x)

Danger caused by unintended movement
of the machine when opening the tailgate.

Risk of injury due to rolling away or tilting ma-
chine.

Before opening the tailgate, make sure that
the machine is correctly attached to the
tractor.

When uncoupling the machine, ensure that
the tailgate is closed.

Содержание Comprima V 180



















































































































































































































































Результаты поиска

Содержание Comprima V 180

Отзывы:

Krone Comprima V 180, Оригинальная инструкция по эксплуатации, Страница: 30 / 242

Результаты поиска

Содержание Comprima V 180

Отзывы: