Krone Comprima F 125, Оригинальная инструкция по эксплуатации, Страница: 187 / 430

Settings
187
Pos: 50.5.39 /BA/Ei nstellungen/R undball enpresse/Netz- und F olienbi ndung Ei nstellungen/Bindematerial bremse einstell en_Verrieg elungsbolzen_text_Netz- und F olienbindung_ALLE C ompri ma @ 512\mod_1502891704094_78.docx @ 3508640 @ @ 1
Setting (I) (net wrapping):
The locking pin with ball head (3) is released (shown with a red
border in the picture). The clamping lever (2) lies against the net roll (1).
Position (II) (chamber film wrapping):
The locking pin with ball head (3) is locked in the side
wall (shown with a red border in the picture). This keeps the clamping lever (2) in bottom
position so that it does not touch the film roll (1).
Changing the chamber film wrapping from position (I) to position (II)
• To lock the locking pin with ball head (3), turn the ball head clockwise until the roll pin (4)
passes through the slit.
• At the same time, move the clamping lever (2) down to the borehole.
The compression spring automatically presses the bolt into the borehole.
Changing the net wrapping from position (II) to position (I)
• To release the locking pin with ball head (3), turn the ball head counter-clockwise and pull
the bolt in the direction of the arrow until the roll pin (4) passes through the slit and the bolt
has snapped home.
Pos: 50.5.40 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1