Krone Comprima F 125 Скачать руководство пользователя страница 162 | Manualshive

Страница: 162 / 430

Krone Comprima F 125 Скачать руководство пользователя страница 162

Operation

162

Pos: 48.99.8 /Ü berschriften/Ü berschriften 3/K-O/N /Netz- oder F olienrolle ei nlegen @ 507\mod_1500300710066_78.docx @ 3485179 @ 3 @ 1

11.19.2

Inserting a net or film roll

Pos: 48.99.9 /BA/Sicherheit/8. Voraussetzung en/Handlungsanweisung für all e M aschinen/Voraussetzung: Die Maschi ne ist stillgesetzt und gesicher t, .... @ 259\mod_1398674434170_78.docx @ 1979947 @ @ 1

Prerequisite:

– Shut down and safeguard the machine, see chapter Safety, "Shutting down and

safeguarding the machine".

Pos: 48.99.10 /Ü berschriften/Z wischenüberschriften/U-Z/Vor dem Ei nlegen ei ner F olienroll e @ 513\mod_1503646917239_78.docx @ 3532578 @ @ 1

Before inserting a film roll

Pos: 48.99.11 /Bei packs/R undball enpressen/F olienbindung/M odulgruppen Foli e einl egen / LED Lichtleiste/Beschreibung 1: F olie einl egen_Beschädigungen an F olie entfer nen_Beipackab2016 @ 513\mod_1503056052740_78.docx @ 3509559 @ @ 1

•  Before inserting the film, check the film roll for damage.

If the film roll is damaged:
•  Unwind the damaged film section and cut it off.
•  Cut off the bulges at the side of the film roll.

Pos: 48.99.12 /Bei packs/R undball enpressen/F olienbindung/M odulgruppen Foli e einl egen / LED Lichtleiste/N etzr olle ei nlegen_Netz- oder F olienrolle ei nleg en_Bil d_N etzbi ndung oder Foli enbindung @ 507\mod_1500359878644_78.docx @ 3485579 @ @ 1

ZBBP1802_3

8

9

10

11

1

6

4

7

3

5

2

Fig. 133

Pos: 48.99.13 /BA/Bedi enung /R undball enpresse/N etz- und F olienbi ndung_Ausführung N etz- und F olienbindung ab 17 18/Netz-/F olienrolle ei nleg en_T ext @ 513\mod_1503386884445_78.docx @ 3528870 @ @ 1

•  Raise the lever (4).
•  Swing the roll holder (6) and brake disc (1) forward.
•  Detach the brake disc (1).
•  Take a new net or film roll from the package. Make sure that the beginning of the roll faces

towards the machine and can be pulled out from above.

• Place the net or film roll (9) on the roll holder (6) and push the holder (7) on.
• Slide the brake disc (1) and cardboard tube clamp (2) anticlockwise into the cardboard

tube (10) of the film or net roll (9) as far as it will go.

The net or film roll (9) is permanently locked in the roll holder (6).
• Swing the roll holder (6) back into the machine and raise it into the lock by means of the

lever (4).

• Actuate the wrapping material brake lever (3) so that the roll holder (6) snaps home at the

wrapping material brake.

• When swinging the roll holder back, ensure that the clamping lever



5) is under the net or

film roll (9).

• Check that the net or film roll (9) is aligned centrally. To do so, measure the distance

dimensions to the left and right side walls.

Pos: 48.99.14 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
160
161
162
163
164
...
»

Содержание Comprima F 125















































































































































































































































































































































































































































Отзывы:

Нет отзывов