Krone Comprima F 125, Оригинальная инструкция по эксплуатации, Страница: 138 / 430

Operation
138
Pos: 48.74.1 /Ü berschriften/Ü berschriften 2/P-T/P/Pr allbl ech ei nstellen @ 471\mod_1471598177525_78.docx @ 3179517 @ 2 @ 1
11.11 Setting the baffle sheet
Pos: 48.74.2 /BA/Bedienung /R undballenpr esse/Pr allbl ech verstell en/Pr allbl ech ei nstellen_Ei nleitung @ 196\mod_1383751549469_78.docx @ 1656355 @ @ 1
The height of the baffle plate (1) can be adjusted to the swath. Position I is the factory default
setting. If the crop is very moist, moving the baffle plate to position II is recommended.
Pos: 48.74.3 /BA/Bedienung /R undballenpr esse/Pr allbl ech verstell en/Pr allbl ech verstell en_Bild C ompri ma, Ulti ma @ 471\mod_1471598315228_78.docx @ 3179548 @ @ 1
1
2
3
4
12
7
3
3
8
9
2
2
4
11
5
13
5
5
10
4
6
Fig. 109
Pos: 48.74.4 /BA/Bedienung /R undballenpr esse/Pr allbl ech verstell en/Pr allbl ech verstell en_T ext1 C ompri ma, Ulti ma @ 473\mod_1472208688819_78.docx @ 3194965 @ @ 1
Moving the baffle sheet (1) from position (I) to position (II)
On the left and right side of the machine:
To dismount the bracket (2),
• remove the linch pin (3),
• loosen the round-head screw (4),
• dismount the spring (11) and
• remove the bracket (2).
• Remove the linch pin (5).
• Move the baffle sheet (1) to the upper borehole (12) and secure with the linch pin (5).
To mount the bracket (2),
• insert the coach screw (4) into the front square hole (6) and secure with a spacer
tube (7), disc (8) and locknut (9),
• place the bracket (2) on the bolt (3) and secure with the linch pin (3) and
• mount the spring (11).
Pos: 48.74.5 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1