manualshive.com logo in svg

Krone AX 250 D, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone AX 250 D Скачать руководство пользователя страница 44

Safety

 

 

44 

 

Pos: 41.9 /Überschriften/Überschriften 3/P-T/Stützfuß @ 111\mod_1336986282572_78.docx @ 988583 @ 3 @ 1 

 

4.6.2 

Support Jack  

Pos: 41.10 /BA/Sicherheit/7. Gefahrenhinweise alt/Ladewagen/Warnung - Maschine nur entladen auf Stützfuß abstellen @ 173\mod_1371018724152_78.docx @ 1484293 @  @ 1 

 

 

WARNING! - Danger to life due to unexpected movements of the machine 

If the machine is put down on the support jack when it is loaded, it may occur that the support 
jack yields. As a result, persons may get hurt due to the tilting machine. 
• 

Make sure that the machine is only put down on the support jack when it is unloaded. 

 

Pos: 41.11 /BA/Inbetriebnahme/Stützfuss/Stützfuß in Abstellposition Bild AX @ 287\mod_1409725717365_78.docx @ 2273709 @  @ 1 

 

1

AX000072

Fig. 5 

Pos: 41.12 /BA/Inbetriebnahme/Stützfuss/Der Stützfuß dient der Standsicherheit der Maschine, wenn sie nicht am Traktor angekuppelt ist @ 111\mod_1336983375177_78.docx @ 988183 @  @ 1 

 

The support jack (1) is designed for the stability of the machine when it is not connected to the 
tractor.  

Pos: 41.13 /BA/Erstinbetriebnahme/Großpackenpressen/AbstellstützeAbstellstütze Standfläche vergrößern (2014-10-22 10:58:04) @ 17\mod_1236319619729_78.docx @ 204459 @  @ 1 

 

 

Note 

If the ground is soft, enlarge the footprint of the parking jack by placing a wooden plank 
underneath. 

 

Pos: 41.14 /Überschriften/Überschriften 3/U-Z/Unterlegkeile @ 33\mod_1254202555660_78.docx @ 318451 @ 3 @ 1 

 

4.6.3 

Wheel chocks  

Pos: 41.15 /BA/Sicherheit/Ladewagen/Unterlegkeile Bild AX @ 287\mod_1409736495933_78.docx @ 2274300 @  @ 1 

 

1

AX000074

1

Fig. 6 

Pos: 41.16 /BA/Sicherheit/Ladewagen/Unterlegkeile Text AX @ 287\mod_1409736579408_78.docx @ 2274331 @  @ 1 

 

The wheel chocks (1) are located at the front wall. 
• 

To prevent the machine from rolling away, place one wheel chock in front of and one wheel 
chock behind a wheel on the front axle. 

 

Pos: 42 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание AX 250 D















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды