manualshive.com logo in svg

Krone AX 250 D, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone AX 250 D Скачать руководство пользователя страница 293

 

Operation

 

293 

 

Pos: 146.1 /Überschriften/Überschriften 2/K-O/Maschine abstellen @ 196\mod_1384184875882_78.docx @ 1661525 @ 2 @ 1 

 

15.24 

Switching off the machine  

Pos: 146.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Ladewagen/Warnung - Maschine nur entladen auf Stützfuß abstellen @ 173\mod_1371018724152_78.docx @ 1484293 @  @ 1 

 

 

WARNING! - Danger to life due to unexpected movements of the machine 

If the machine is put down on the support jack when it is loaded, it may occur that the support 
jack yields. As a result, persons may get hurt due to the tilting machine. 
• 

Make sure that the machine is only put down on the support jack when it is unloaded. 

 

Pos: 146.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/Warnung - Maschine sicher abstellen ohne Traktor_Feststellbremse, Unterlegkeile @ 287\mod_1409664457896_78.docx @ 2272835 @  @ 1 

 

 

WARNING! 
Risk of injury due to the unsecured machine rolling away! 

If the machine is not secured against rolling away when it has been switched off, there is a risk 
of people being injured by the machine rolling away in an uncontrolled manner. 
• 

Secure the machine against rolling away with the parking brake and wheel chocks. 

 

Pos: 146.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание AX 250 D















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды