Krone AX 250 D Скачать руководство пользователя страница 351

Страница: 351 / 398

Maintenance – lubrication chart

351

•

Remove the locking cams from the hub.

•

Clean all parts.

•

Grease all parts with Walterscheid grease by using a brush.

To grease, use Agraset 116 (order no. 304291) or Agraset 147 (order no.102966). The grease
must be purchased from Walterscheid.
•

Top up the deepening in the coupling housing with grease.

Pos: 219 /BA/Wartung/Nockenschaltkupplung/Wartung - Nockenschaltkupplung zusammenbauen ÜS @ 293\mod_1411458863722_78.docx @ 2306104 @ @ 1

Assembling cam-type clutch

Pos: 220 /BA/Wartung/Nockenschaltkupplung/Wartung - Nockenschaltkupplung zusammenbauen: Bild @ 293\mod_1411459475712_78.docx @ 2306195 @ @ 1

ZX400171

Fig. 224

Pos: 221 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @ @ 1

Pos: 222 /BA/Wartung/Nockenschaltkupplung/Wartung - Nockenschaltkupplung zusammenbauen: Text @ 291\mod_1410843953059_78.docx @ 2297965 @ @ 1

Caution!

Always observe the position of the bevelled edge on the locking cams when inserting

the locking cams.
– Locking cam a) = right
– Locking cam b) = wrong
•

Insert locking cams into hub.

•

Insert the pre-assembled hub into the coupling housing.

•

Insert shim rings and support disc and secure with retaining ring.

•

Apply grease again on shim rings, support disc and retaining ring.

• Insert

seal

ring.

Pos: 223 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание AX 250 D















































































































































































































































































































































































































Результаты поиска

Содержание AX 250 D

Отзывы:

Бренды по названию

Популярные бренды

Krone AX 250 D, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание AX 250 D

Отзывы:

Бренды по названию

Популярные бренды