Krone AMT 4000 CV, Руководство по эксплуатации

Страница: 5 / 46

3
5.The operator’s clothing should be tight fitting. Avoid
wearing loose fitting clothes.
6.Keep the machine clean to prevent the danger of fire!
7.Before starting the machine and moving off, check the
danger area around the machine (children)! Good all-
round visibility is essential!
8.Carrying passengers on the implement during work or
transport is not permitted.
9.Make sure that the implement is correctly coupled, and
that it is only fixed and secured with the prescribed
fittings!
10.Make sure that supports, jacks etc. are in the correct
position during assembly and disassembly!
11.Special care is required when implements are being
coupled to the tractor or uncoupled from the tractor!
12.Ballast weights must always be attached as prescribed
and at the designed attachment points!
13.Adhere to the permitted axle loads, total weights and
transport dimensions!
14.Check and fit transport equipment, e.g. lighting, warning
signs and, if appropriate, protective equipment!
15.Operating equipment for remote controls (ropes, chains,
rods etc.) must be laid out in such a way that it can not
cause inadvertent movements in any transport or
operating position.
16.Before any road transport, move the equipment into
the prescribed position and secure it in accordance
with the manufacturer’s instructions!
17.Never leave the driver’s position when the tractor is in
motion!
18.The speed of travel must always be suited to the
environmental conditions! Avoid any sudden turns
when travelling uphill, downhill or across a slope!
19.The handling, steering and braking of the tractor is
affected by integrated or attached equipment and
ballast weights. Make sure that you allow sufficient
flexibility for steering and braking!
20.When turning, remember to take account of the wide
load and/or the greater weight of the equipment!
21.Only switch on equipment when all protective devices
are fitted and in protection position!
2. Safety and accident prevention
regulations
1. Take note of both the regulations in these operating
instructions and also the generally applicable safety
and accident prevention regulations!
2. The attached warning and information signs give
important advice for safe operation. Observing them
will enhance your safety.
3. When you use public roads, make sure you observe
the relevant traffic regulations!
4. Make sure you know all equipment and controls and
their functions before you begin working with the
machine When you are operating the machine, it’s too
late!
Before any public roads are used and
before the machine is started, the disc
mower and the tractor must be checked
for roadworthiness and operational
safety.
1. Operation in accordance with
specifications
The disc mower is designed exclusively for normal agri-
cultural use (operation in accordance with specifica-
tions).
Any use of the machine for other purposes is deemed to
be not in accordance with specifications. The manufacturer
bears no responsibility for any resulting damage; such
use is entirely at the operator’s risk.
Use in accordance with specifications also includes
adherence to the operating, maintenance and service
instructions prescribed by the manufacturer.
The disc mower must only be used, maintained and
repaired by personnel who are acquainted with the machine
and have been informed of the danger involved.
The applicable accident prevention regulations and all
other generally recognized safety, health and road traffic
regulations must be adhered to.
Any unauthorized alterations to the machine render any
liability for damage undertaken by the manufacturer null
and void.
III. General
Basic rule: