Krone AMT 4000 CV, Руководство по эксплуатации

Страница: 15 / 46

13
Preparing for operation
2 Preparing for operation
Special safety notes
• Keep a sufficiently safe distance from the cutting tools during operation.
• Even when the mower is used in accordance with specifications, stones etc. may be
thrown out. Therefore, no-one shoud be standing in the danger area. Particular care
should be taken when working near roads or buildings.
• Check the protective cloth covers regularly. Replace worn or damaged protective
cloth covers.
• The protective devices on the mower unit, e.g. cloths and guard plates, should be
engaged before starting work.
• No-one must be allowed to walk between the tractor and the mower, when the mower
is being moved from transport postion to mowing position or back to transport
position.
• Particular care is required when fitting attachments to the tractor or removing them!
It is essential that the accident prevention regulations are observed.
• The mower unit is hitched off centre. When braking in dangerous situations
(cornering on slippery ground) the tractor can jack-knife. The minimum unladen
weight of tractor of 4000 kg should therefore be fulfilled.
2.1 Preparing the disc mower
Assemble the PTO shaft (1) with extended guard (2) on
to the machine. Hang the retaining chain (4) in the hole
(3) to prevent the protective tube (5) from turning with
the shaft.
PTO shaft
2.2 Attaching the disc mower
Connect the lower link arms (2) to the mounting frame
of the mower (1), secure and raise slightly.
AMT4-0-008
5 4
3
1
2
AMT4-0-001
1
2