16
Preparing for operation
Move the additional stop (1) on the swivel cylinder
(2) in the direction of the arrow. It should be in the
folded (lower) position.
2.3 Working position
Open the shut-off taps (1) and (2) on the hydraulic
hoses (see direction of the arrow).
•
Open the shut-off tap (2) (blue 2)
•
Shut-off tap (1) (red 1) is open
•
Switch off the PTO shaft drive
•
Switch off the PTO shaft before
transport on public roads.
•
Raise the mower unit, move the
machine into transport position.
•
Permissible top speed 25 km/h.
2.4 Transport position
NOTE
•
Activate the single-action control device
•
The working wheels (1) and (3) are lowered
•
The left-hand transport wheel (2) loses contact with
the ground
(a = approx. 50 mm
)
•
Activate the double-action control device
•
The swinging drawbar turns, the transport wheels
travel at the same height
•
If the swivel cylinder has reached the additional stop
(transport wheels up) the swivel operation is
completed.
CAUTION: Close the shut-off tap on the hydraulic
hose (blue 2). Swivelling back to transport position
when the PTO shaft is running can cause damage.
AMT4-0-011
3
2
a
1
AMT 4-0-009
2
1
AMT4-0-010
1
2
AMT4-0-010
1
2
Содержание AMT 4000 CV
