Krendl 500 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 59

Krendl 500 Скачать руководство пользователя страница 8

Rev. Date: 3/14/18

Page 5

MODEL #500

Rotating parts will be moving in this direction.

Indicates which employee date equipment was inspected.

Operating machine at specified voltage will result
in longer machine life and better performance.

Identifies if machine is in remote mode, manual mode, or
off position. In manual mode this switch operates ma-
chine. In remote mode the hand pendant operates ma-
chine. Each time machine cycle starts, an audible alarm
warns the operator that the machine is about to come on.

Indicates that the electrical box on the ma-
chine is in compliance with UL codes.

Indicates that this outlet is intended for only the
wireless remote. Each time machine cycle
starts, an audible alarm warns the operator that
the machine is about to come on.

Specifies the voltage this outlet is rated for.

Indicates the input power of the machine.

Indicates that this outlet is intended for only the
remote control outlet. Each time machine cycle
starts, an audible alarm warns the operator that
the machine is about to come on.

Reset button for motor.

KMC-01234

Part number for identification and tracking.

Indicates this unit has two power sources that
should be disconnected before servicing to re-
duce the risk of serious injury or death.

«
...
6
7
8
9
10
...
»

Содержание 500




























































Отзывы:

Нет отзывов