manualshive.com logo in svg

Krendl 500, Руководство пользователя, Страница: 4 / 59

Поделиться
Скачать
Krendl 500 Скачать руководство пользователя страница 4

Rev. Date: 3/14/18

Page 1

MODEL #500

INTRODUCTION

Thank you for purchasing a 

KRENDL FIBER MOVING MACHINE.

  With over sixty years experience in

manufacturing fiber moving equipment, we have designed and built your machine with the highest quality
to provide years of reliable service.

This manual has been prepared to help you obtain the maximum efficiency and service from your Krendl
equipment.  The machine is designed to condition and apply fibers with the utmost in dependable
performance.  Our primary objective is to build equipment which will provide complete satisfaction so that
you may confidently recommend Krendl to others.

We do not manufacture or sell fibers.  Our interest lies only in the proper performance of the equipment we
manufacture.  We make no recommendations or guarantees concerning various fibers.

CAUTION:

This manual contains important information regarding the 

safe

 assembly and operation of your

machine.  We urge you to read it carefully and follow the instructions provided.  If your questions are not
answered in this manual, may we hear from you?  We want you to be able to operate this unit safely
and confidently.

UNPACKING: 

 Store and unpack carton with correct side up.  Unpack your machine 

IMMEDIATELY

 and

check for damage in shipping.  

Place any damage claim with delivering carrier, saving all packing

materials for inspection.

  Our warranty covers manufacturer's defects only.  DO NOT return to shipper.

FILL IN AND RETAIN:

Krendl Machine Company

Telephone: 800-459-2069

1201 Spencerville Rd

Fax:

419-695-9301

Delphos, Ohio 45833 U.S.A.

E-mail:

[email protected]

Web Site:

www.krendlmachine.com

For your protection in the event of theft or loss, please fill in the information requested for your own
records. This information will be needed for in-warranty repairs.  You may also want to attach a copy of
your invoice.

Machine model number                             _

Blower motor manufacturer                                                                                   _

Serial number                                            _

Agitator motor manufacturer                                                                                   _

Blower(s) serial number(s)                         _

Speed reducer manufacturer                                                   _

Date of purchase                                       _

Supplier                                                                                   _

The model and machine serial numbers are located on the base of the machine unit.  The blower(s) serial
number(s) is located on the motor housing of blower.

Содержание 500




























































Отзывы:

Нет отзывов