22
Krell Showcase Processor
The Showcase Processor remote control provides on and off, input
selection, processing mode selection, speaker volume and balance
adjust, and mute functions, as well as access to the system configu-
ration menu.
The Showcase Processor remote control uses one CR2025 lithium
battery, which is included with the shipment.
To open the battery compartment on the back of the remote control:
1. Place the remote face down on the table.
2. Use your thumbnail or a small jeweler’s or eyeglass screwdriver
to move the small tab toward the center of the remote, while
using your index fingernail or screwdriver to pull down gently on
the slot to the right of the tab. The battery compartment will slide
out.
3. Place the battery, plus side up, in the battery tray.
4. Slide battery compartment back into the remote until you hear a
click.
The remote control is ready for operation.
Do not use a knife or other sharp objects to open the battery compartment;
they will scratch the remote control finish.
Replace batteries when remote control function becomes intermittent.
Remove batteries if the remote control is not to be used for a long period of
time. Battery leakage can damage the remote control.
Remote Control Description
See Figure 5 on page 21
BATTERY
INSTALLATION
AND REMOVAL
Notes
