Back Panel Description,
continued
20
Krell Showcase Processor
47 Component Video Inputs
The Showcase Processor is equipped with three sets of component
video inputs.
On-screen display (OSD) is not available for progressive component video.
OSD is available for interlaced component video.
48 Comm Port RS-232 Connector
The Showcase Processor is equipped with an RS-232 communica-
tion port, which allows you to send operational instructions directly to
the Showcase Processor using an external computer control system.
49 RC-5 In
The RC-5 input makes custom installation easy and secure by
accepting baseband RC-5 input commands from hardwired remote
controllers.
50 12 VDC In and Out
The 12 VDC output sends a 12 Volt power on/off signal to other Krell
components via a 12 V trigger cable, as well as to other devices that
incorporate 12 Volt power on/off trigger input. The Showcase
Processor has four programmable 12 Volt outputs and one input.
When the Showcase Processor is in the operational mode and a trigger is
enabled, the 12 VDC Out provides 12 V of DC output. When the Showcase
Processor is in the stand-by mode or off, or if a trigger is not enabled, the
DC output is 0 V.
Power Connections
Video Inputs and Outputs,
continued
Back Panel Remote
Control Connections
Note
Note
51 Back Panel Power Switch
Use this switch to change the Showcase Processor from off to
stand-by.
52 IEC Connector
The Showcase Processor is equipped with a standard female IEC
power connector, for use with the AC power cord.
