Front Panel Description,
continued
16
Krell Showcase Processor
Individual Channel
Trim Buttons
continued
25 Sub Button
Press the sub (subwoofer) button, then use the direction or level but-
tons (28) to adjust the subwoofer loudspeaker volume.
26 Balance Button
Press this button to adjust the main left/right speaker balance. This
button converts the volume level controls to balance controls.
Balance levels are shown numerically on the front panel display.
Balance may be adjusted in .5 dB increments, up to 6 dB. The center
position is displayed as
BAL 0
. The balance level buttons revert back
to their original functions as volume level controls after 3 seconds of
inactivity.
27 Save Button
Press and hold this button to save system configuration settings. The
save button is also used in programming a learning remote. See
Saving and Recalling Customized Settings and Restoring the
Factory Default System Settings,
on page 67, and
Program
Remote,
on page 61.
28 Direction or Level Buttons
Use these buttons to scroll through menu selections, adjust the out-
put for the entire system, and adjust balance and volume levels for
the center loudspeaker, surround/back loudspeakers, and subwoofer.
In the operational mode, right button engages Digital Room EQ and
the up and down buttons select EQ memory. Volume and balance
levels are shown in the front panel display (22).
29 Recall Button
Use this button to recall previously stored system configuration set-
tings. Also use this button to return configuration settings to factory
default: With the Showcase Processor in the operational mode, hold
the recall button and press the power button. See
Saving and
Recalling Customized Settings and Restoring the Factory
Default System Settings,
on page 67.
Processor Function
Buttons
