manualshive.com logo in svg

Krell Industries Showcase DVD, Руководство пользователя для владельца

Поделиться
Скачать
Krell Industries Showcase DVD Скачать руководство пользователя страница 22

Back Panel Description

See Figure 4 on page 17

18

Showcase Processor

The back panel of the Showcase Processor provides all audio and
video input and output connections, remote control inputs and out-
puts, power on and off, and power connection. The back panel func-
tions are described below.

30 Balanced Analog Audio Outputs

The Showcase Processor is equipped with eight balanced analog
audio channel outputs, with XLR connectors, for the left, center, sub-
woofer, surround left, surround right, back left, and back right.

31 Single-ended Analog Audio Outputs

The Showcase Processor is equipped with eight single-ended analog
audio channel outputs, with RCA connectors, for the left, center, right,
subwoofer, surround left, surround right, back left, and back right.

32 Balanced Analog Audio Inputs

The Showcase Processor is equipped with one set of balanced
inputs with XLR connectors.

33 Tape In Left and Right

The Showcase Processor is equipped with one set of single-ended
tape inputs with RCA connectors.

34 Tape Out Left and Right

The Showcase Processor is equipped with one set of single-ended
tape outputs with RCA connectors. 

35 VCR In Left and Right

The Showcase Processor is equipped with one set of single-ended
inputs with RCA connectors, for a VCR audio source. 

36 VCR Out Left and Right

The Showcase Processor is equipped with one set of single-ended
outputs with RCA connectors, for a VCR audio source.

37 Single-ended Analog Audio Inputs

The Showcase Processor is equipped with seven sets of single-
ended inputs with RCA connectors.

38 7.1 Audio Inputs

The Showcase Processor is equipped with eight single-ended 7.1
inputs for multichannel SACD and DVD audio devices. These inputs
are analog pass-through inputs.

FEATURES

Analog Audio Outputs
and Inputs

Содержание Showcase DVD



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды