Krautzberger 200-0148, Руководство по эксплуатации

Страница: 8 / 49

Example for safety instructions in operating instructions
Safety instructions can refer to specific, individual operating instructions. Such safety instructions
are embedded in the operating instructions so that they do not disrupt the reading flow during the
execution of the action. The signal words described above are used.
1. Unfasten screw.
2.
CAUTION!
Pinching hazard at the lid!
Carefully close lid.
3. Tighten screw.
Special safety instructions
The following symbols are used in safety instructions to draw the attention to specific hazards:
Warning signs Type of danger
Warning – danger zone.
Additional identifications
The following symbols are used in this manual to highlight operating instructions, results, lists, ref-
erences, and other elements:
Identification Explanation
Step-by-step instructions
ð Results of procedural steps
References to sections in this manual and other applicable docu-
ments
Lists without specified order
[Pushbutton] Operating elements (e.g. pushbuttons, switches), display ele-
ments (e.g. signal lights)
‘Display’ Screen elements (e.g. pushbuttons, assignment of function keys)
2.2 Personnel requirements
This manual identifies the qualifications of the personnel for the different scopes of work as listed
below:
Qualified personnel
Due to their specialised professional training, knowledge, and experience as well as knowledge of
the industry-specific standards and regulations, qualified personnel are in a position to perform
assigned tasks and to identify and avert potential risks on their own.
Operating instructions
T-Dok-040-GB-Rev.5
mail@krautzberger.com, www.krautzberger.com GB–8