Krautzberger 200-0148, Руководство по эксплуатации

Страница: 37 / 49

Spray pattern Error Cause Remedy
Spray pattern too thin n Cap nut loose n Tighten cap nut
Fluid jet comes out in
spurts or rapid bursts n Insufficient mate-
rial supply n Increase material
supply
n Blocked fluid path n Clean (
Ä
Chapter 8.3
‘Cleaning the
automatic spray
gun’ on page 29
).
n Loose or dam-
aged fluid nozzle n Tighten or replace
(
Ä Chapter 8.4
‘Changing the
fluid nozzle and
the air nozzle’
on page 30
).
n Worn needle seal n Replace needle
seal (
Ä
Chapter
8.6 ‘Changing the
seals’
on page 34
).
Leakage on the
clamping screw n Needle seal
defective n Replace needle
seal (
Ä Chapter
8.6 ‘Changing the
seals’
on page 34
).
Fluid nozzle drips n Worn or damaged
fluid needle n Change fluid
needle (
Ä
Chapter 8.5
‘Changing the
fluid needle’
on page 31
).
n Dirty or damaged
fluid nozzle n Clean (
Ä Chapter 8.3
‘Cleaning the
automatic spray
gun’ on page 29
)
or replace (
Ä
Chapter 8.4
‘Changing the
fluid nozzle and
the air nozzle’
on page 30
) fluid
nozzle.
Automatic spray gun A 10
ENGLISH
■ 200-0148 GB–37