Krautzberger 200-0148, Руководство по эксплуатации

Страница: 30 / 49

8.4 Changing the fluid nozzle and the air nozzle
Removing the nozzles
1. Clean the automatic spray gun (
Ä
Chapter 8.3 ‘Cleaning the automatic spray gun’
on page 29 )
Fig. 8: Changing the nozzles
2.
WARNING!
The locking piece ( Fig. 8/5) is under spring force!
Carefully unscrew the locking piece ( Fig. 8/5).
3. Loosen cap nut ( Fig. 8/1).
4. Remove air nozzle ( Fig. 8/2).
5. Unscrew fluid nozzle ( Fig. 8/3).
Always change the fluid nozzle ( Fig. 8/3) and fluid needle ( Fig. 8/4) at the same time (
Ä
Chapter 8.5 ‘Changing the fluid needle’ on page 31).
Attaching the nozzles
1. Tighten fluid nozzle ( Fig. 8/3).
2. Attach air nozzle ( Fig. 8/2) and tighten it with the cap nut ( Fig. 8/1).
3. Screw on the locking piece ( Fig. 8/5).
Operating instructions
T-Dok-040-GB-Rev.5
mail@krautzberger.com, www.krautzberger.com GB–30