Krautzberger 200-0148, Руководство по эксплуатации

Страница: 13 / 49

The intended use also includes the compliance with all the information in this operating manual.
3.3 Specification for the operation of a complete machine
n The operation without CE-marking is prohibited.
n Prior to its use, the automatic spray gun must be assembled to form a complete machine.
n Only operate the automatic spray gun after proper fastening on a suitable carrier construction.
3.4 Predictable misuse
Any use beyond the intended use or any other use constitutes misuse.
n Only carry out the installation and start-up in accordance with the steps described in this oper-
ating manual.
n Always observe the applicable country-specific safety, accident prevention, occupational
safety, and environmental protection regulations for the area of use for the automatic spray
gun.
n
Ensure that the utilised hose lines fulfil the requirements with respect to pressure, chemical,
and mechanical loads.
n
Do not use sharply abrasive, chemically aggressive, very hot or very cold spray fluids without
first consulting with and receiving approval from Krautzberger GmbH.
n
Adhere to the safety data sheets of the spray fluid manufacturer.
n Only use the manufacturer's OEM parts.
n Only operate the automatic spray gun after proper fastening on a suitable carrier construction.
n Do not hold the automatic spray gun in your hand during operation.
n Only operate the automatic spray gun while adhering to the values specified in (
Ä
Chapter
13 ‘Technical data’ on page 42 ).
n Make sure that the connected compressed air is oil-free and free from solid matter.
n Operate the automatic spray gun with processed, dried compressed air (air quality pursuant to
DIN ISO 8573-1: quality class 4).
n Never point the compressed air at living beings.
WARNING!
Misuse of the automatic spray gun can cause dangerous situations.
No claims of any kind can be asserted due to damage resulting from misuse!
3.5 Responsibility of the owner
Owner
The owner is the person, who directly operates the machine for commercial or economical pur-
poses or who allows a third-party to use/apply it and who is responsible for the legal product stew-
ardship for the protection of the user, the personnel or third parties.
Owner responsibilities
The machine is used in an industrial environment. The owner of the machine is therefore subject to
the obligations as stipulated by the Occupational Health and Safety Act.
Automatic spray gun A 10
ENGLISH
■ 200-0148 GB–13