manualshive.com logo in svg

KP Electronic Systems RCI5000, Руководство пользователя, Страница: 30 / 52

Поделиться
Скачать
KP Electronic Systems RCI5000 Скачать руководство пользователя страница 30

   

30 

3.8.1

 

LCD Reports 

At the main display level there’s a status line that displays general system status, date 

and time. Date and time represents the last time there was a status change in one or 

more internal modules of the RCI. 

The modules are: Power, Channel, COM, USB and Printer. By scrolling up/down keys 

user can see those statuses. 

Besides those reports, the RCI5000 will also display channel monitor status and 

interrogation results. 

3.8.2

 

PC Reports 

The codes for PC reports are: 

Module 

Fail Code 

OK Code 

PC serial port (COM) 

A1 

B1 

USB A2 

B2 

Printer A3 

B3 

Power A6 

B6 

Channel A8 

B8 

MC2 C1 

 

Channel monitor busy 

Dx 

 

Channel monitor restore from busy  8x 

 

Channel monitor quiet 

Ex 

 

Channel monitor restore from quiet  9x 

 

End unit OK 

00 

 

End unit not respond 

AA 

 

 

Notes: 

-

 

All internal events that occurred without initiated check will be reported to serial port (COM) 

of the PC as a message with account numbers, system number and message type zero. 

-

 

‘x’ character in channel monitor section represents the channel number (1). 

-

 

End unit status reports are the interrogation results. In this case the account and system 

address will be the end unit address. 

Содержание RCI5000





















































Отзывы:

Нет отзывов