15
3.1
Setup
Setup section of the RCI5000 describes function and setup of all RCI5000’s parameters.
Two options available for setup the RCI5000:
1.
Using RCI5000’s front panel – LCD and Keyboard. Please refer to section:
‘3.2 RCI5000 parameters and set up using front panel’
for instructions. To enter the
setup module, a password is required. The password is a six numbers combination from
zero to nine. The RCI5000 manufactures with a default factory password.
2.
Using GUP5000™ - General Utilty Program – a PC Windows based application. Please
refer to Appendix B – GUP5000 installation, and to following section:
‘
3.3
Setup using GUP5000 – General Utility PC software’
– for GUP5000 operation.
3.2
RCI5000 Parameters and setup using front panel
The RCI5000 stores its parameters in its internal memory, and keep it without change
even in a total unit power fail case.
Parameters includes:
1.
General parameters
!
RCI ID
!
Buzzer control
2.
Ports parameters
!
COM protocol type
!
COM baud rate
!
COM On/Off status
!
USB protocol
!
USB On/Off status
!
PRN Auto LF Yes/No status
!
PRN Backup On/Off status
!
PRN On/Off status
3.
Channel parameters
!
Protocol type
!
Message filter
!
Systems and accounts selective
!
Channel quiet time
!
Channel busy time